TM 9-3950-253-13&P
0008
LOAD CONTAINER - Continued
Figure 8. Joystick Set at LOAD.
3.
Keeping joystick (Figure 9, Item 1) at LOAD, increase engine speed (maximum 1,500 rpm)
(PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P). Middle frame (Figure 9, Item 2) pivots
forward, further raising front of container (Figure 9, Item 3) and moving vehicle rearward.
Figure 9. Middle Frame Pivots Forward.
NOTE
If container becomes lodged on tapered guide, raise and lower hook arm until container is
released. It may be necessary to temporarily place front slider bed in flatrack
configuration(WP 0006) in order to realign container.
4.
While watching container (Figure 10, Item 2) in right and left mirrors, verify that container is between right
and left tapered guides (Figure 10, Item 1) on rear slider beds, before it makes contact with rear sliders
(Figure 10, Item 3). If necessary, steer vehicle to guide container between tapered guides, or unload and
repeat load procedure.
03/15/2011Rel(1.10)root(opusualwp)wpno(O582008)