TM 9-3950-253-13&P
0008
ATTACH LIFT FRAME TO CONTAINER - Continued
Figure 2. Upper Locating Pins Fully Lowered.
3.
If upper guides do not become fully located on corner castings, perform these procedures:
a.
Load with Empty Lift Frame (WP 0007).
b.
Stow Lift Frame (WP 0007).
c.
Reposition vehicle to pick up other end of container (PLS: TM 9-2320-364-14&P,
HEMTT: TM 9-2320-326-14&P).
d.
Retrieve Lift Frame (WP 0007).
e.
Bail Bar Lock Installed on Hook (WP 0007).
f.
Unload with Empty Lift Frame (WP 0007).
g.
Attach Lift Frame to Container (in this work package).
WARNING
During these procedures, operator will be required to climb on and around the vehicle. Be
sure to wear suitable footwear, ensure no surfaces are slippery, wear suitable gloves and
hard hat, and maintain three points of contact to the vehicle. Failure to follow this warning
may result in injury or death to personnel. Seek medical attention in the event of injury.
NOTE
Alternatively, use an appropriate means to gain access to upper apertures and clear them
of obstructions, using crowbar if necessary. Afterwards, return crowbar to its storage
location on lift frame.
4.
Keep engine at idling speed and joystick (Figure 3, Item 1) at UNLOAD to further lower lift frame (Figure 3,
Item 2). Also slowly reverse vehicle in order to press lift frame fully against container (Figure 3, Item 3).
03/15/2011Rel(1.10)root(opusualwp)wpno(O582008)