TM 9-3950-253-13&P
0069
INSTALLATION
WARNING
During these procedures, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required. Failure to follow this warning may result
in injury to personnel. Seek medical attention in the event of an injury.
NOTE
Perform steps 1 through 6 for both right and left sides.
Install collars as noted during removal.
1.
Install handle (Figure 2, Item 6) in air transport lifting pin (Figure 2, Item 7).
2.
Install two knobs (Figure 2, Item 5) on handle (Figure 2, Item 6).
3.
Install collar (Figure 2, Item 8) and spring pin (Figure 2, Item 4) on air transport lifting pin (Figure 2, Item 7).
4.
Install air transport lifting pin (Figure 2, Item 7) on stowage assembly (Figure 2, Item 1).
5.
Install collar (Figure 2, Item 2) and spring (Figure 2, Item 3) on air transport lifting pin (Figure 2, Item 7).
6.
Lower air transport lifting pin (Figure 2, Item 7) until collar (Figure 2, Item 2) is at base of bracket.
0069-4
03/15/2011Rel(1.10)root(maintwp)wpno(M582068)
