TM 9-3950-253-13&P
0083
INSTALLATION
NOTE
Perform steps 1 through 4 for both right and left sides.
1.
Apply grease to roller pin (Figure 1, Item 5).
2.
Install spacer ring (Figure 1, Item 8), angled roller (Figure 1, Item 7), spacer (Figure 1, Item 6), and roller pin
(Figure 1, Item 5) on slider assembly (Figure 1, Item 10).
3.
Install washer (Figure 1, Item 4), new star washer (Figure 1, Item 3), and bolt (Figure 1, Item 2) on roller pin
(Figure 1, Item 5).
4.
Install two grease fittings (Figure 1, Items 1 and 9) on rear slider assembly (Figure 1, Item 10).
END OF TASK
END OF WORK PACKAGE
0083-3/blank
03/15/2011Rel(1.10)root(maintwp)wpno(M582082)