TM 9-3950-253-13&P
0082
INSTALLATION
NOTE
Perform steps 1 through 3 for both right and left sides.
1.
Apply grease to roller pin (Figure 1, Item 2).
2.
Install flatrack roller (Figure 1, Item 7), two thrust washers (Figure 1, Item 6), and roller pin (Figure 1, Item 2)
on rear beam (Figure 1, Item 1).
3.
Install washer (Figure 1, Item 3), new star washer (Figure 1, Item 4), and bolt (Figure 1, Item 5) on rear
beam (Figure 1, Item 1).
END OF TASK
FOLLOW-ON MAINTENANCE
Install bumper stop bracket (PLS: TM 9-2320-364-14&P, HEMTT: TM 9-2320-326-14&P).
END OF TASK
END OF WORK PACKAGE
0082-3/blank
03/15/2011Rel(1.10)root(maintwp)wpno(M582081)