TM 9-3950-253-13&P
0083
REMOVAL
NOTE
Perform steps 1 through 3 for both right and left sides.
1.
Remove two grease fittings (Figure 1, Items 1 and 9) from rear slider assembly (Figure 1, Item 10).
2.
Remove bolt (Figure 1, Item 2), star washer (Figure 1, Item 3), and washer (Figure 1, Item 4) from roller pin
(Figure 1, Item 5). Discard star washer.
3.
Remove roller pin (Figure 1, Item 5), spacer (Figure 1, Item 6), angled roller (Figure 1, Item 7), and spacer
ring (Figure 1, Item 8) from rear slider assembly (Figure 1, Item 10).
Figure 1. Angled Roller Replacement.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M582082)
