TM 9-3950-253-13&P
0081
CLEANING AND INSPECTION
Clean and inspect all parts IAW (WP 0061), General Maintenance Instructions.
END OF TASK
INSTALLATION
NOTE
Perform steps 1 through 5 for both right and left sides.
Install spacers as noted during removal.
1.
Apply grease to roller pin (Figure 1, Item 4).
2.
With assistance, install twistlock housing (Figure 1, Item 8) and locking pin (Figure 1, Item 9) on rear slider
bed (Figure 1, Item 1).
3.
With assistance, install twistlock assembly (Figure 1, Item 7) in rear slider bed (Figure 1, Item 1), aligning
holes in twistlock housing (Figure 1, Item 8), twistlock assembly, and rear roller bed, install two spacers
(Figure 1, Item 5), roller pin (Figure 1, Item 4), washer (Figure 1, Item 3), and bolt (Figure 1, Item 2) in rear
slider bed.
4.
Install locking pin (Figure 1, Item 6) on rear slider bed (Figure 1, Item 1).
5.
Install clip (Figure 1, Item 10) in locking pin (Figure 1, Item 9).
END OF TASK
END OF WORK PACKAGE
0081-3/blank
03/15/2011Rel(1.10)root(maintwp)wpno(M582080)