TM 9-3950-253-13&P
0090
REMOVAL
WARNING
During these procedures, personnel are required to work outside the vehicle where there
are several projecting parts, and personnel are required to bend down. Take care when
bending and straightening. A hard hat is required. Failure to follow this warning may result
in injury to personnel. Seek medical attention in the event of an injury.
NOTE
Perform steps 1 and 2 for both right and left sides.
Note position and orientation of shear latch to aid in installation.
Ensure air transport lifting pin does not obstruct access while removing shear
latch.
1.
Remove bolt (Figure 1, Item 7), locknut (Figure 1, Item 3) and washer (Figure 1, Item 2) from stowage
assembly (Figure 1, Item 8). Discard locknut.
2.
Remove bolt (Figure 1, Item 6), locknut (Figure 1, Item 5), washer (Figure 1, Item 4) and shear latch
(Figure 1, Item 1) from stowage assembly (Figure 1, Item 8). Discard locknut.
0090-2
03/15/2011Rel(1.10)root(maintwp)wpno(M582089)