TM 9-3950-253-13&P
0091
CONVERT TO STANDARD CONFIGURATION - Continued
16.
Remove lifting device and sling from lifting eye (Figure 14, Item 1) at top of lift frame (Figure 14, Item 2).
17.
On each side of the stowage unit, turn adjustment levers (Figure 14, Item 3) clockwise to lower lift frame
(Figure 14, Item 2).
Figure 14. Lower Lift Frame.
WARNING
During these procedures, the operator will be required to climb on and around the vehicle.
Be sure to wear suitable footwear, ensure no surfaces are slippery, wear suitable gloves
and hard hat and maintain three points of contact to the vehicle. Failure to follow this
warning may result in injury or death to personnel. Seek medical attention in the event of
an injury.
18.
Retrieve bail bar lock from storage compartment of vehicle.
19.
Install bail bar lock (Figure 15, Item 4) and locking pin (Figure 15, Item 3), on lift frame (Figure 15, Item 1).
20.
Install snap pin (Figure 15, Item 2) in locking pin (Figure 15, Item 3).
03/15/2011Rel(1.10)root(maintwp)wpno(M582090)
