TM 10-3930-641-34-2
LOCATION/ITEM
ACTION
REMARKS
1.
Bearing cup (15)
Lower temperature and install in center of
case (14).
NOTE
Be sure back of bearing is flush with counter-
bore in case.
2.
Two bearing cones (16)
a. Heat to maximum of 2750F (1350C).
b. Install on driven gear (17).
3. Driven gear (17)
Install in case (14) as shown.
4.
Bearing cup (15)
Lower temperature of cup and install in cage
(19).
NOTE
Be sure bearing cup bottoms in counterbore in
cage.
TA099331
Go on to Sheet 3
4-130