ARTICULATED HITCH DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 11 of 16)
Install in lower pivot joint from the bottom of
Upper collar (6)
Lower temperature to -900F to -1100F
(-32 to -430C) and install.
Lower cap (26)
Install in bore of front upper pivot joint.
Three capscrews (29)
Install in lower cap an equal distance apart
and tighten evenly.
Bearing cup (21)
Lower temperature to -900F to -110F
(-32 to -430C) and install in bore.
Use to make bearing cup (8) contact cap.
Two bearing cones (20)
Install in bore.
Go on to Sheet 12