TM 5-3810-306-34
ROCKER LEVER INSTALLATION
EQUIPMENT CONDITIONS: Negative battery cable disconnected at shunt.
(Refer to TM 5-3810-306-20.)
Engine hood assembly removed.
(Refer to TM 5-3810-306-20.)
Engine cool to touch.
Valve cover removed. (Refer to TM 5-3810-306-20.)
REMOVAL:
1. REMOVE ROCKER LEVER ASSEMBLY.
a. Loosen locknuts (1) and loosen adjusting
screws (2) until they stop.
b. Remove twelve capscrews (3) rocker lever
clamps (4), rocker lever assemblies and
rocker lever support (5).
c. Remove oil transfer tube (11).
d. Remove push rods (12).
DISASSEMBLY:
1. DISASSEMBLE ROCKER LEVER ASSEMBLY.
a. Remove retaining rings (6), thrust washers
(7), wave washers (8) and rocker levers
(9) from rocker shaft (10).
b. Remove locknut (1) and adjusting screw
2. REMOVE
SCREWS
(13)
FROM
OIL
TRANSFER TUBE (11) ENDS.
4-53