TM 5-3810-306-34
EQUIPMENT CONDITIONS: Negative battery cable disconnected at shunt.
(Refer to TM 5-3810-306-20.)
REMOVAL:
1. REMOVE FRONT GEAR TRAIN.
a. Note or mark position of angle drive
adapter (3).
b. Tag and disconnect electrical lead (8).
c. Remove two capscrews (1) and washers
(2).
d. Remove angle drive adapter (3) and
gasket (4). Discard gasket (4).
e. Remove cover (5) and gasket (6). Discard
gasket (6).
f. Remove coupling hub (7).
2. INSPECT ALL PARTS FOR
DAMAGE.
REPLACE PARTS AS REQUIRED.
INSTALLATION:
1. INSTALL FRONT GEAR TRAIN.
a. Attach coupling hub (7) to engine.
b. Install cover (5) and new gasket (6).
c. Install angle drive adapter (3) and new
gasket (4).
secure with capscrews (1) and washers
d. Clamp angle drive adapter (3) in position
(2).
noted or marked and
2. CONNECT NEGATIVE BATTERY CABLE AT
SHUNT. (REFER TO TM 5-3810-306-20.)
4-56