TM 10-3930-641-20
STARTING WITH OUTSIDE ELECTRICAL SOURCE
(Sheet 1 of 1)
LOCATION/ITEM
ACTION
REMARKS
Be sure main disconnect switch and POWER
switch are off and keys removed before you
connect slave cable to your vehicle.
1. Starting cable
Connect to emergency starting (slave)
receptacle.
2. Engine
Start.
See TM 10-3930-641-10.
NOTE
To use the emergency starting receptacle, use
jumper cable with a plug to mate with recepta-
cle. Connect external stating source first, then
insert plug into receptacle of vehicle to be
started. After engine starts, remove plug from
receptacle.
TA 098889
End