TM 10-3930-641-20
(Sheet 1 of 1)
MANUAL RELEASE OF PARKING BRAKE
REMARKS
ACTION
LOCATION/ITEM
Po manually release parking brake, do the
following:
Block. This will keep the vehicle from rolling
1. Wheels
vhen parking brake is released.
Connect to front and rear frames. (See page
2. Shipping link (1) at bottom of
articulated (steering) joint, left
side of vehicle.
Remove from storage holes in cover.
3. Capscrews (2, 3, 4) on cover of
parking/emergency brake. Parking
brake is mounted on front of
transmission housing.
a. Install capscrews in forcing holes (5, 6,
4. Capscrews
in cover of emergency/parking brake.
b. Tighten until there is solid resistance.
After repairs have been made and before oper-
ating the vehicle, disconnect shipping link (1),
remove capscrews from forcing holes. Install
capscrews in storage holes.
