TM 10-3930-641-20
(Sheet 3 of 5)
BATTERY CABLE REMOVAL, REPAIR, AND INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
Remove negative terminals first.
Loosen battery terminal clamp nuts (5).
a.
1. Battery terminals (1, 2,3,4)
When terminals (2, 3) are removed, cable (6) may be
b. Use terminal clamp puller to remove
removed from vehicle.
clamps from posts.
If you are replacing battery terrninaks only,
c.
pull or cut them from cables. Clean cable
ends, and reinstall.
d. If you are replacing terminals and cables,
pull or cut battery terminals from cables
(7, 8), and goon to step 2.
Remove nuts which hold terminals to
a.
2. Terminals (9, 10,11,12, 13)
studs.
Cable (14) may be removed from vehicle when terminals
b. Remove terminals from studs.
(10, 11, 13) are removed.
c.
If you are replacing only terminals, pull or
cut lug terminals from cables, and
reinstall.
d. If you are replacing cables, pull or cut ter-
minals from cables, and go on to step 3.
Go on to Sheet 4
2-281
