TM 10-3930-641-20
(Sheet 2 of 2)
HEAD LIGHT AND BACKUP LIGHT SEALED LAMP UNITS REMOVAL/INSTALLATION (CONT)
ACTION
LOCATION/ITEM
REMARKS
Loosen screws and remove moldings.
1. Screws (4) and moldings (2)
Remove.
2. Rubber ring (1) under molding
Disconnect, remove, and discard.
3. Sealed unit (3)
Insert in body assembly and connect.
1. Sealed unit (3)
Install.
2. Ring (1) under molding.
Reassemble. Install molding with sharp curved
3. Molding (2) and screw (4)
side toward middle o: ring.
TA 098692
End
2-286