TM 10-3930-641-20
(Sheet 4 of 5)
BATTERY CABLE REMOVAL, REPAIR, AND INSTALLATION (CONT)
REMARKS
LOCATION/ITEM
ACTION
a.
Slide cables (7, 8) through grommet (18).
3. Cables (6, 7,8, 14)
b. Remove cables (7, 8) from clips (15, 16,
17).
Remove from vehicle
c.
Length
Cable Number
a.
Cut new cables.
1. Cables (6, 7,8, 14)
7.25 in. (18.4 cm)
6
b. Slide cables (7, 8) through grommet
(18).
58 in. (147 cm)
7
Install cables (7, 8) into clips (15, 16,
c.
74 in. (188 cm)
8
17).
15 in. (38 cm)
14
Install on cables, and crimp tight.
2. Terminals (9, 10, 11, 12, 13)
a. Install on cables, and crimp tight.
3. Battery terminals (1, 2,3,4)
Be sure polarity (+ and -) connection is cor-
rect. Alemator may be damaged if terminals
axe reversed.
Do not hammer terminals onto posts. Posts
and terminals will be damaged.
Go on to Sheet 5