TM 10-3930-641-20
(Sheet 5 of 5)
BATTERY CABLE REMOVAL, REPAIR, AND INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
b. Use temimd cleaning tool to clean posts,
3. Battery terminals l , 2 , 3 , 4 ) ( c o n t )
and install battery terminals to posts.
Tighten terminal clamps with clamp nuts
c.
(5).
Do not pull hard on terminals or twist with
pliers. Posts and terminals will be damaged.
d. Check terminal connections by gently lift-
ing and twisting. If terminals move, tighten
nuts (5).
Cover terminals with light coat of GAA
e.
grease - 1/32 to 1/8 in. (1-3 mm).
End
2-283
