TM 10-3930-641-20
(Sheet 2 of 5)
BRAKE PEDAL LINKAGES DISASSEMBLY/ASSEMBLY (CONT)
ACTION
LOCATION/ITEM
DISASSEMBLY
Make sure all pressure in brake system is re-
[eased before any lines are disconnected. With
engine off, pump a brake pedal repeatedly until
all pressure is relieved.
Remove.
Two panels that cover brake pedal
1.
linkage and cables
Remove.
Spring (1)
2.
Remove.
Two capscrews and washers that
3.
secure angle stop (2)
Remove.
Angle stop (2)
4.
Remove.
Cotter pin, two washers and pin (3)
5.
that secure cable clevis
Go onto Sheet 3