TM 10-3930-641-20
(Sheet 7 of 7)
SERVICE BRAKE PEDALS REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
Connect to lever assembly with washers (15),
8. Cable end (20)
pin (17) and cotter pin (21).
Install on pin in lever assembly.
9. Spring (18)
Install against lever with two cap screws (13)
10. Angle assembly (16)
a. Install on splined shaft (1) of lever assembly
11. Pedal (11) and washer (3)
so it is about 3.75 in. (95.3 mm) from floor.
b. Secure with capscrew (10).
12. Brake pedal
Adjust.
13. Floor panels
Install.
End