TM 10-3930-641-34-1
FLYWHEEL SPECIFICATIO
(Sheet 1 of 1)
(1)
Maximum permissible change in distance from center of bore
(eccentricity) during one rotation
(total indicator reading)................................... 006 in. (0.15 mm)
(2)
Gear. Maximum temperature for
installation...............................................................6000F (3160C)
NOTE
Install gear with chamfer on teeth in direction shown.
(3)
Torque for the bolts that hold the flywheel
to the crankshaft.........................200 + 20 lb. ft. (270 + 27 N.m)
(4)
Maximum permissible change in distance from center of bore
(eccentricity) during one rotation
(total indicator reading).................................... 005 in. (0.13 mm)
(5)
Maximum permissible change from an exact vertical face (run out)
during one rotation
(total indicator reading)................................... .006 in. (0.15 mm)
TA098826
2-96