TM 10-3930-641-34-1
SUPPLEMENTAL STEERING FLOW SWITCH SPECIFICATIONS
(Sheet 1 of 1)
With hydraulic oil at 1500F (660C):
Circuit opens at........................................ 6.2 + .4 U.S. gpm (23.5 + 1.5 liter/min)
Circuit closes at ....................................... 3.6 + .4 U.S. gpm (12.6 + 1.5 liter/min)
Installation Procedure:
(1)
Install switch and tighten lower body
to a torque of ....................................... 190 + 20 lb. In. (21.5 + 2.3 N m)
(2)
Put the upper body in position so that the arrow points in the
direction of flow ..................................... Away from main steering pump.
(3)
in position .................................................42 18 lb. in. (4.7 + 2.0 N m)
TA098867
2-137