TM 10-3930-641-34-1
TORQUE CONVERTER SPECIFICATIONS
(Sheet 1 of 2)
(1)
Torque for the bolts that fasten flange to
converter housing ...........................................81 + 4 lb. ft. (111 + 5 N m)
(2)
Torque for the bolts that fasten
turbine to the hub.............................................. 81 +4 lb. ft. (111 i 5 N m)
(3)
Torque for bolts that fasten converter housing to
clutch housing ...................................................36 + 2 lb. ft.(46 + 3 N m)
(4)
Torque for bolts that fasten disc to
outer impeller.....................................................20 + 1 lb. ft.(25 1 N m)
(5)
Torque for bolts that fasten centrifugal valve to
clutch housing ...................................................20 + 1 lb. ft.(25 1 N m)
(6)
Torque for bolts that fasten inner impeller to
clutch housing .................................................85 + 5 lb. ft.(115 + 7 N m)
(7)
Torque for the bolt that fastens the retainer
to output shaft.................................................. 85 * 5 lb. ft.(115 + 7 N-m)
(8)
Clearance between hub and bearing in cover assembly:
Across the diameter .................... 0025 to .0065 in. (0.064 to 0.165 mm)
(9)
Clearance between hub and bearing in carrier assembly:
Across the diameter .................... 0028 to .0068 in. (0.071 to 0.173 mm)
(10)
Clearance between bearing
and plate...................................... 0020 to .0826 in. (0.051 to 2.098 mm)
(11)
Clearance between stator and turbine:
Across the diameter .............................. 032 + .010 in. (0.81 0.25 mm)
Maximum permissible clearance across
the diameter ................................................................ 048 in. (1.22 mm)
TA098868
Go on to Sheet 2
2-138
