TM 10-3930-641-34-1
TRANSMISSION SPECIFICATIONS
(Sheet 1 of 1)
(1)
Thickness of three new discs and
two new plates for the
No ..................................... 1 clutch 1.175 to 1.205 in (29.85 to 30.6 mm)
(2)
Thickness of three new discs and
two new plates for the
No ................................... 3 clutch 1.175 to 1.205 in (29.85 to 30.61 mm)
(3)
Thickness of two new discs and
one new plate for the
No ........................................ 4 clutch 696 to .714 in (17.68 to 18.14 mm)
(4)
Thickness of three new discs and
two new plates for the
No ................................... 6 clutch 1.175 to 1.205 in (29.85 to 30.61 mm)
(5)
Distance to install bearing
in shaft .......................................................................... 375 in (9.53 mm)
(6)
2P5755 Spring for No .............................................. 1 and No 2 clutches:
Length under test force ............................................... 3.42 in (86.9 mm)
Test force .............................................................. 25.4 * 2 lb (113 t 9 N)
Free length after test ................................................. 4.86 in (123.4 mm)
Outside diameter ........................................................ 563 in (14.30 mm)
(7)
Thickness of three new discs and
two new plates for the
No ................................... 2 clutch 1.175 to 1.205 in (29.85 to 30.61 mm)
(8)
9H5537 Spring for No.................................... 3, No 4 and No 6 clutches:
Length under test force ............................................... 1.84 in (46.7 mm)
Test force ............................................... 28.75 + 2.30 lb (128.0 i 10.3 N)
Free length after test ................................................... 2.47 in (62.7 mm)
Outside diameter ........................................................ 563 in (14.30 mm)
(9)
Thickness of five new discs and
four new plates for
No ................................... 5 clutch 1.448 to 1.502 in (36.78 to 38.15 mm)
TA098873
2-143