TM 10-3930-641-34-1
CYLINDER HEADS REMOVAL/INSTALLATION (CONT)
(Sheet 8 of 14)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Guide bolts can be used to help aline cylinder
head with spacer plate.
5.
Cylinder head bolts
Coat threads with clean engine oil.
6.
Cylinder head bolts and washers
a. Install finger tight.
b. Tighten each bolt in the sequence shown
at right to a torque of 200 + 20 lb. ft.
(271.2 + 27.1 N-m);
c.
Tighten each in the same sequence to
330 + 15 lb: ft. (447.4 + 20.3 N.m).
TA099078
Go on to Sheet 9
3-224