TM 10-3930-641-34-1
CYLINDER HEADS REMOVAL/INSTALLATION (CONT)
(Sheet 12 of 14)
LOCATION/ITEM
ACTION
REMARKS
18.
Head bolts (11)
Tighten to a torque of 32 + 5 lb ft (43.4 +
6.8 N m).
19.
Remainder of 3/8" head bolts
Tighten to a torque of 32 + 5 lb ft 43.4 +
6.8 N m).
NOTE
If exhaust manifold studs were removed, install
new studs and tighten each to a torque of
20 + 3 lb. ft. (27.1 + 4.1 N m).
20.
Valves
Adjust clearance.
See Valve Clearance Setting, page 3-268.
21.
Valve cover base
a. Position on cylinder head.
b. Tighten bolts in sequence shown at right to
a torque of 18 + 5 lb. ft. (24 + 7 N-m).
TA099082
Go on to Sheet 13
3-228