TM 10-3930-641-34-1
CYLINDER HEADS REMOVAL/INSTALLATION (CONT)
(Sheet 9 of 14)
LOCATION/ITEM
ACTION
REMARKS
d. Again tighten each in that sequence to
330 + 15 lb. ft. (447.4 + 20.3 N-m).
7.
Valve bridge dowels (2)
Coat with clean engine oil.
NOTE
Check dowel height and diameter. If dowels
do not meet specifications, replace them.
8.
Valve bridges (3)
Install.
9.
Push rods (4)
Install.
TA099079
Go on to Sheet 10
3-225