TM 10-3930-641-34-1
CYLINDER HEADS REMOVAL/INSTALLATION (CONT)
(Sheet 13 of 14)
LOCATION/ITEM
ACTION
REMARKS
22.
O-ring seal (13)
Coat with clean engine oil.
23.
Spacers, fuel line adapters (14)
Install.
24.
Locks (15)
Install.
25.
Fuel lines (16)
a. Connect to fuel line adapters.
b. Tighten fuel line nuts to a torque of 30 + 5
lb. ft. (40.7 + 6.8 N m).
26.
Fuel lines (17)
a
Coat O-ring seals with clean engine oil.
b. Use special socket to loosely connect fuel
lines to fuel line adapters.
c.
Tighten fuel line nuts to a torque of 30 + 5
lb. ft. (40.7 + 6.8 N-m).
TA099083
Go on to Sheet 14
3-229
