TM 10-3930-641-34-1
PISTON AND CONNECTING ROD DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 3 of 4)
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY
1.
Retaining rings (13)
Remove using suitable snap ring pliers.
2.
Piston pin (12) and connecting
Remove from piston (5).
rod (9)
3.
Sleeve bearing (7)
Remove from connecting rod eye using press
and driver.
4.
Piston rings (2), (3), (4)
Remove from piston using piston ring
expander.
NOTE
It may not be necessary to remove sleeve bear-
ing. See engine specifications, page 2-69, to
determine if bearing is excessively worn.
Go on to Sheet 4
3-357