TM 10-3930-641-34-1
PISTON AND CONNECTING ROD DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 3 of 4)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
1.
Piston rings (2) (3) (4)
Install on piston (5).
NOTE
Stagger ring gaps 120 degrees and be certain
two top rings have top side up.
2.
Connecting rod (9)
a. Install sleeve bearing (7) in rod eye.
b. Correctly position connecting rod in
piston.
3.
Piston pin (12)
Install.
4.
Retaining rings (13)
Install using suitable snap ring pliers.
End
3-358
