TM 10-3930-641-34-1
PISTON AND CONNECTING ROD REMOVAL/INSTALLATION (CONT)
(Sheet 4 of 6)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
1.
Upper bearing
a. Install in connecting rod.
NOTE
Be sure bearing tab (3) is correctly seated in
groove in connecting rod.
b. Coat bearing surface with clean engine oil.
2.
Crankshaft journal
Coat with clean engine oil.
3.
Connecting rod
Put into position on crankshaft journal.
4.
Lower bearing
a. Coat bearing surface with clean engine oil.
b. Install in connecting rod cap.
Go on to Sheet 5
3-362
