TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY (OUTPUT) ASSEMBLY (CONT)
(Sheet 8 of 9)
LOCATION/ITEM
ACTION
REMARKS
23.
Roller assembly (66)
a.
Heat to maximum of 2750F (1350C).
b.
Install on shaft (68).
24.
Two bearing cups (42) and cones
Lower temperature of cups and cones and
(43) install in cage (45).
25.
Retainer (41)
Install and secure with capscrews to a torque
of 3545 lb. ft. (48-60 N⋅m).
26.
Lip type seal (18)
Using driver, install in cage (45) as shown.
NOTE
Install so back of bearing contacts counterbore
and bearing lip points forward inside of cage.
27.
Cage (45), spacer (38), gear (37)
Using suitable press, install on shaft as shown.
28.
Dirt guard (49).
Install on yoke (50).
TA099351
Go on to Sheet 9
4-153
