TM 10-3930-641-34-2
TRANSFER GEAR ASSEMBLY BEARINGS ADJUSTMENT (INPUT) (CONT)
(Sheet 2 of 2)
LOCATION/ITEM
ACTION
REMARKS
1.
Shims (1)
Install enough so that the end play of gear (2)
is .002 to .006 in. (0.05 to 0.15 mm)
2.
Shims (3)
Install enough so that the end play of gear (4)
is .002 to .004 in. (0.05 to 0.10 mm)
3.
Capscrew (5)
Tighten to a torque of 315 to 385 lb. ft.
(425 to 515 N⋅m).
4.
Capscrew (6)
Tighten to a torque of 35 to 45 lb. ft.
(48 to 62 N⋅m).
NOTE
Before oil seal is installed, put Liquid Gasket
Material on seal bore surface in case and let
dry. Do not put Liquid Gasket Material on
seal case.
Put same type lubricant used in gear case on
lip of seal before seal is installed.
TA099353
End
4-156
