TM 10-3930-641-34-2
DRIVE SHAFTS DISASSEMBLY / ASSEMBLY (CONT)
(Sheet 9 of 15)
LOCATION/ITEM
ACTION
REMARKS
LOWER FRONT DRIVE
SHAFT ASSEMBLY
1.
Yoke of front shaft
Align spider assembly (5) on yoke.
2.
Four capscrews (7)
Install. Tighten to a torque of 90 to 110 lb. ft.
(122 to 149 N-m).
3.
Guard (1)
Install on splined end of front shaft.
4.
Spacer (2)
Install on splined end of front shaft.
5.
Frontshaft
Block up shaft with splined end pointing up.
6.
Bearing cage (16)
Lay on flat surface with flanged opening
face down.
TA099440
Go on to Sheet 10
4-316