TM 10-3930-641-34-2
ARTICULATED HITCH DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 12 of 16)
LOCATION/ITEM
ACTION
REMARKS
20.
Upper bearing cup (10)
Lower temperature to -900F to -110F
(-32.1 to -430C) and install in upper pivot
joint.
21.
Bearing driver
Use to make bearing cup (10) contact bearing
cone.
22.
Shims (13)
Install original amount.
23.
Cap (8)
Install.
24.
Three capscrews (15)
Install in upper cap an equal distance apart
and tighten evenly.
25.
Caps (12) and (8)
Remove. Install nuts and sleeve, as shown, on
bearing cones.
26.
Caps (12) and (8)
Install.
27.
Capscrews (15)
Install.
28.
Bearing cones (20)
Check amount of torque needed to turn
Go on to Sheet 13
6-47
