TM 10-3980-641-34-2
ARTICULATED HITCH DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 13 of 16)
LOCATION/ITEM
ACTION
REMARKS
NOTE
The amount of torque must not be less than
80 lb. in. (9 N-m) or more than 400 lb.
(45 N-m). Remove or install shims until you
have the correct amount of torque.
29.
Two caps (8) and (12) and
Remove.
installation tooling
30.
Seals (11)Install in caps (8) and (12).
NOTE
Install seal until it makes contact with
c
counterbore. Lips of seals must be toward
inside of caps.
31.
Caps (9) and (11)
Install again.
32.
Capscrews (15)
Install all capscrews and tighten evenly.
Go on to Sheet 14
6-48