TM 10-3930-675-10-1
PREPARATION FOR TRANSPORT - CONTINUED
0007 00
PLACING CAB IN TRANSPORT POSITION
0007 00
NOTE
indicators, and components.
1.
Move Cab to Transport Position.
WARNING
When moving cab into transport position, place hands on side of cab out of way of gears. Failure to do
so may result in injury to personnel.
NOTE
If RTCH cab is being moved to transport position in order to perform maintenance, it may not be pos-
sible to run engine. Auxiliary pump will operate without engine running.
a. Run RTCH engine at idle.
NOTE
Skip step b if RTCH cab is being moved to transport position in order to perform maintenance or if
boom support is NOT going to be lowered.
b. If boom support is to be lowered, remove retaining pin from boom support locking pin extension on each side of
boom support.
BOOM SUPPORT BOOM
RETAINING
BOOM SUPPORT
RETAINING
BOOM SUPPORT
SUPPORT
PIN
LOCKING PIN
PIN
LOCKING PIN
434-10006
BOOM SUPPORT
BOOM SUPPORT
LOCKING PIN EXTENSION
LOCKING PIN EXTENSION
(RETRACTED)
0007 00-2
