Error Code 1332 - Injector Circuit Failure - Continued

Error Code 1332 - Injector Circuit Failure - Continued - TM-10-3930-675-20-1_181

Error Code 1332 - Injector Circuit Failure - Continued - TM-10-3930-675-20-1_183

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
155

TM 10-3930-675-20-1 0007 00-64 ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED 0007 00 Table 12. Error Code 1332 - Injector Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1332 - Injector Circuit Failure - Continued c. Measure resistance from actuator harness connector pin 36 to all pins in actuator harness connector. Resistance should be greater than 100k ohms. a. If resistance is not as specified, repair or replace connectors (WP 0111 00). b. If engine harness requires replacement, notify SRA. d. Measure resistance from actuator harness connector pin 36 to all pins in sensor harness connector. Resistance should be greater than 100k ohms. a. If resistance is not as specified, repair or replace connectors (WP 0111 00). b. If engine harness requires replacement, notify SRA. 5. Place ignition switch in OFF position and disconnect actuator harness 15-pin connector at front of engine below rocker arm cover. Disconnect actuator harness connector from engine ECU. >100K OHMS

Privacy Statement
Press Release
Contact