Error Code 1332 - Injector Circuit Failure - Continued

Table 12. Error Code 1332 - Injector Circuit Failure Troubleshooting Procedures

Error Code 1332 - Injector Circuit Failure - Continued - TM-10-3930-675-20-1_182

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
154

TM 10-3930-675-20-1 0007 00-63 ENGINE FUEL INJECTOR CIRCUITS TROUBLESHOOTING - CONTINUED 0007 00 Table 12. Error Code 1332 - Injector Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1332 - Injector Circuit Failure - Continued 4. Place ignition switch to OFF position and disconnect actuator harness from engine ECU and 15-pin connector at front of engine below rocker arm cover. Disconnect sensor harness from engine ECU. a. Measure resistance from actuator harness connector pin 26 to all pins in actuator harness connector. Resistance should be greater than 100k ohms. a. If resistance is not as specified, repair or replace connectors (WP 0111 00). b. If engine harness requires replacement, notify SRA. b. Measure resistance from actuator harness connector pin 26 to all pins in sensor harness connector. Resistance should be greater than 100k ohms. a. If resistance is not as specified, repair or replace connectors (WP 0111 00). b. If engine harness requires replacement, notify SRA. <10 OHMS

Privacy Statement
Press Release
Contact