TM 10-3930-675-20-1
0008 00-24
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 4. Error Code 1432 - Accelerator Pedal Circuit Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1432 - Accelerator Pedal Circuit
Failure - Continued
4. Place ignition switch in OFF
position, disconnect harness
from throttle position sensor,
and disconnect OEM harness
connector from engine ECU.
a. Measure resistance from
OEM harness connector pin
48 to pin 5 of 690 connector
(X690) on harness side of
throttle position sensor
connector.
Resistance
should be less than 10
ohms.
If harness requires replacement,
notify SRA.
b. Measure resistance from
OEM harness connector
pin 47 to pin 6 of 690
connector
(X690)
on
harness side of throttle
position sensor connector.
Resistance should be less
than 10 ohms.
If harness requires replacement,
notify SRA.
5,6
USE TEST LEAD KIT P/N 3822758
6
5
4
1
2
3
<10 OHMS