Error Code 1431 - Idle Validation Switch Circuit Failure - Continued

Error Code 1431 - Idle Validation Switch Circuit Failure - Continued - TM-10-3930-675-20-1_211

Error Code 1431 - Idle Validation Switch Circuit Failure - Continued - TM-10-3930-675-20-1_213

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
184

TM 10-3930-675-20-1 0008 00-20 ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED 0008 00 Table 3. Error Code 1431 - Idle Validation Switch Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1431 - Idle Validation Switch Circuit Failure - Continued b. Measure resistance from OEM harness connector pin 13 to OEM harness connector pin 19 with accelerator pedal depressed. Resistance should be less than 125 ohms. If harness requires replacement, notify SRA. 10.Place ignition switch in OFF position, disconnect OEM harness connector from engine ECU, and disconnect harness from sensor switch. 11.Place all cab switches to NEUTRAL or OFF position. Set service brake. Disconnect sensor harness connector from engine ECU. USE TEST LEAD KIT P/N 3822758 <125 OHMS <125 OHMS

Privacy Statement
Press Release
Contact