Error Code 1132 - Throttle Position Sensor Circuit Failure - Continued

Error Code 1132 - Throttle Position Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_206

Table 3. Error Code 1431 - Idle Validation Switch Circuit Failure Troubleshooting Procedures

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
179

TM 10-3930-675-20-1 0008 00-15 ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED 0008 00 Table 2. Error Code 1132 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1132 - Throttle Position Sensor Circuit Failure - Continued 13.Place ignition switch to OFF position and disconnect harness from throttle position sensor and disconnect OEM harness connector from engine ECU. 14.Measure resistance between pin 47 and all other pins in harness connector. Resistance should be greater than 100k ohms. If harness requires replacement, notify SRA. >100K OHMS >100K OHMS

Privacy Statement
Press Release
Contact