TM 10-3930-675-20-1
0008 00-12
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 2. Error Code 1132 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1132 - Throttle Position Sensor
Circuit Failure - Continued
6. Place ignition switch in OFF
position
and
disconnect
harness from throttle position
sensor and disconnect harness
connector from engine ECU.
a. Measure
resistance
between pin 47 of OEM
harness connector and pin 5
of throttle position sensor
harness side connector.
Resistance should be less
than 10 ohms.
If harness requires replacement,
notify SRA.
b. Measure
resistance
between pin 48 of OEM
harness connector and pin 6
of throttle position sensor
harness side connector.
Resistance should be less
than 10 ohms.
If harness requires replacement,
notify SRA.
7. Place ignition switch in OFF
position and disconnect OEM
harness from throttle position
sensor and disconnect harness
connector from engine ECU
OEM harness connector.
5,6
USE TEST LEAD
6
5
4
1
2
3
<10 OHMS
KIT P/N 3822758
