TM 10-3930-675-20-1
0008 00-7
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 1. Error Code 1131 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1131 - Throttle Position Sensor
Circuit Failure - Continued
13.Measure resistance between
pin 47 and pins 5, 6, and 16 of
harness
connector.
Resistance should be greater
than 100k ohms.
If harness requires replacement,
notify SRA.
14.Place ignition switch to OFF
position
and
disconnect
harness from throttle position
sensor and OEM harness
connector from engine ECU.
15.Measure resistance between
pin 47 and all other pins in
harness
connector.
Resistance should be greater
than 100k ohms.
If harness requires replacement,
notify SRA.
>100K OHMS
USE TEST LEAD
KIT P/N 3822758
