Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued

Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_197

Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_199

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
170

TM 10-3930-675-20-1 0008 00-6 ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED 0008 00 Table 1. Error Code 1131 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued 10.Place ignition switch to OFF position and disconnect harness from throttle position sensor. Disconnect OEM harness connector from engine ECU. 11.Measure resistance between pin 47 and pins 1, 2, 3, and 13 of harness connector. Resistance should be greater than 100k ohms. If harness requires replacement, notify SRA. 12.Place ignition switch in OFF position, disconnect harness from throttle position sensor and disconnect OEM harness connector from engine ECU. USE TEST LEAD >100K OHMS KIT P/N 3822758

Privacy Statement
Press Release
Contact