Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued

Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_195

Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued - TM-10-3930-675-20-1_197

TM-10-3930-675-20-1 Rough Terrain Container Handler (RTCH): RT 240; 53 000 Lb Capacity; 4x4 Manual
Page Navigation
168

TM 10-3930-675-20-1 0008 00-4 ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED 0008 00 Table 1. Error Code 1131 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued. MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION Error Code 1131 - Throttle Position Sensor Circuit Failure - Continued 5. Measure resistance between pin 48 and pin 49 on OEM harness when accelerator pedal is up or down. Resistance should be 2000- 3000 ohms. If harness requires replacement, notify SRA. 6. Place ignition switch in OFF position, connect harness to throttle position sensor, and disconnect OEM harness connector from engine ECU. 7. Measure resistance between pin 48 and pin 47 on harness when accelerator pedal is up or down. Resistance should be greater than 100k ohms. If harness requires replacement, notify SRA. USE TEST LEAD 2000-3000 OHMS KIT P/N 3822758

Privacy Statement
Press Release
Contact