TM 10-3930-675-20-1
0008 00-5
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 1. Error Code 1131 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1131 - Throttle Position Sensor
Circuit Failure - Continued
8. Place ignition switch in OFF
position. Disconnect OEM
harness
connector
from
engine
ECU.
Disconnect
throttle position sensor.
9. Measure resistance between
pin 47 and pin 49 on harness
connector. Resistance should
be greater than 100k ohms.
If harness requires replacement,
notify SRA.
USE TEST LEAD
>100K OHMS
KIT P/N 3822758
USE TEST LEAD
>100K OHMS
KIT P/N 3822758
