TM 10-3930-675-20-1
0008 00-11
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 2. Error Code 1132 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1132 - Throttle Position Sensor
Circuit Failure - Continued
5. Place ignition switch to OFF
position and disconnect OEM
harness from throttle position
sensor and engine ECU OEM
harness connector.
a. Inspect harness connector
and engine ECU connector
for dirty, corroded, bent,
broken, pushed back, and
extended pins.
Clean and repair connector(s) as
required (WP 0111 00).
b. Check harness and engine
ECU for dirt or moisture in
or on connector and for
missing
or
damaged
connector seals.
Remove dirt and moisture from
connector. Replace missing or
damaged connector seals (WP
0111 00).
PIN 6
USE TEST LEAD KIT P/N 3823996
X690
1 OR
2 GN
3 BU
BK 6
RD 5
WH 4
>100K OHMS
