TM 10-3930-675-20-1
0008 00-13
ENGINE TPS AND IDLE VALIDATION SWITCH TROUBLESHOOTING - CONTINUED
0008 00
Table 2. Error Code 1132 - Throttle Position Sensor Circuit Failure Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Error Code 1132 - Throttle Position Sensor
Circuit Failure - Continued
8. Measure resistance between
pin 48 of OEM harness
connector to engine block
ground. Resistance should be
greater than 100k ohms.
If harness requires replacement,
notify SRA.
9. Place ignition switch in OFF
position, disconnect harness
connector from engine ECU,
and disconnect harness from
throttle position sensor.
10.Measure resistance from pin
47 of OEM harness connector
to engine block ground.
Resistance should be greater
than 100k ohms.
If harness requires replacement,
notify SRA.
>100K OHMS
USE TEST LEAD
KIT P/N 3822758
